Metallic Ptfe Liner Bearings
Your Leading Metallic PTFE Liner Bearings Supplier
Lianyi Technology is a national high-tech enterprise at the forefront of cross disciplines, integrating high-performance materials, special equipment design, simulation, test and evaluation, mechanism research, overall provision of technical solutions, production, and sales. The team is distributed in Minhang, Shanghai and Huzhou, Zhejiang. with completely independent intellectual property rights and friction, lubrication, materials, and design capabilities, with nearly 100 patents and software copyrights. It has the world's most comprehensive plain bearing R & D system.
Product Categories
Latest Products
why choose us
Professional manufacturing
Lianyi bearing is a manufacturer and exporter of a full range of tapered roller bearings, deep groove ball bearings and housed ball bearings. There are more than 300 employees, including engineering and technical personnel, and the factory building area is 30,000 square meters.
R&d and patents
Currently, there are 40 r&d engineers in the r&d department, including more than 20 with master's degree or above. We own more than 30 patents and software copyrights, and have developed one of the most comprehensive sliding bearing r&d systems in the world.
Quality control
We use advanced automated production lines and testing lines for tapered rollers, deep groove ball bearings, and seated ball bearings. We strictly adhere to the iso 9001 quality management system to provide you with high-quality and reliable products.
Solution provider
We provide solutions based on your requirements, specified materials and product structures are available, and will provide a complete dfmea for the product as soon as possible for subsequent production. And our proprietary materials are competitively priced.
Benefits of Metallic PTFE Liner Bearings




Thicker wear surface
A PTFE-lined bearing is composed of a metal shell and a very thin coating of polytetrafluroethylene, or PTFE, applied to the inside as the wear surface of the bearing. These types of bearings typically have a maximum wear surface of 0.025 mm, or about 0.001 inches. As the PTFE lining is stripped or worn off during operation, the metal shell becomes exposed, creating a metal-on-metal effect between the bearing and the shaft; this can cause serious shaft damage, or seizing of the bearing. This issue is most common when bearings are used in oscillating applications, or where high edge loads are present.
Resistance to corrosion and chemicals
The metal shell of a PTFE-lined bearing becomes problematic in applications where water or chemicals are present. In these types of environments, metal rusts, corrodes, and contaminates sensitive areas, while also leading to bearing failure. Bearings made entirely of plastic are impervious to rust, and highly engineered materials are available to resist chemicals, oils, and other caustic media.
Weight savings
PTFE-lined bearings weigh much more than a full plastic option. When using a heavier bearing, no matter what the material, more energy is required to operate the bearing system. This can be problematic, especially in vehicle applications, such as automobiles, aerospace applications, recreational vehicles, and bicycles.
Constant coefficient of friction
Thanks to the very low values of PTFE, the coefficient of friction of a PTFE-lined bearing is usually very good during the beginning of the bearing's service life. However, the very thin PTFE layer will be worn away over time, creating a rapid increase in the COF as metal-on-metal contact occurs. On the other hand, iglide® plastic bearing materials are a homogenous blend of base polymers, strengthening fibers, and solid lubricants. With particles of lubricant throughout the entire bearing thickness, the bearings have a brief start-up phase while they mate with the shaft surface, after which the COF remains constant throughout the entirety of the bearing's service life.
Versatile Applications
These PTFE-lined bearings are tailored for high-duty applications, including:
Automotive suspension struts
Enhance vehicle stability by providing smooth, low-friction movement.
01
Shock absorbers
Reduce the impact of road irregularities, improving comfort and handling.
02
Hydraulic cylinders
Deliver consistent and efficient movement under high pressure.
03
Gear pumps and motors
Support smooth fluid transfer in various industrial processes.
04
Axial and radial piston pumps and motors
Maintain precision and reliability under varying loads.
05
Product Specifications
|
BASE |
Carbon steel or Stainless steel or Aluminium |
|
PTFE thickness |
0.20-0.30 mm |
|
High load capacity, self-lubricating in dry operation |
|
|
Bond strength |
≥10N/IN(SAE standard) |
|
Max. Line speed(dry ) |
2.5m/s |
|
coefficient of friction(dry) |
0.09-0.12 |
|
Max. static load |
380N/mm2 |
|
Max. dynamic load(0.1m/s) |
250N/mm2 |
|
Linear Thermal Expansion (10-6℃K-1)(-30-100℃) |
12 |
|
Operating temperature |
-40℃-+200℃ |
Packaging and Transportation
Packaging details:The packaging of Plastic flims + Anti-rust Oil + Carton+Pallet


Our Certificates



FAQ
s one of the leading metallic ptfe liner bearings manufacturers and suppliers in China, we warmly welcome you to buy metallic ptfe liner bearings made in China here from our factory. All customized products are with high quality and competitive price. Contact us for more details.
Heavy walled Tube Self lubricating Bearing without Seam, Plug Graphite Self Lubricating, wear bushing








